{"product_id":"ea888-3-stage-2-ethanol-blend-semi-custom-ots-ecu-tune","title":"EA888.3 Stage 2 Ethanol-Blend Semi-Custom OTS ECU Tune","description":"\u003ch1\u003eEA888.3 Stage 2 Ethanol-Blend Semi-Custom OTS ECU Tune\u003c\/h1\u003e\n\u003ch2\u003eMore Airflow. More Octane. More Performance.\u003c\/h2\u003e\n\u003cp\u003eTake your factory-turbo Volkswagen or Audi to the next level with a \u003cstrong\u003eStage 2 ethanol-blend semi-custom OTS ECU tune\u003c\/strong\u003e from GLS Performance Motorsports.\u003c\/p\u003e\n\u003cp\u003eThis calibration is designed for supported EA888.3 vehicles equipped with Stage 2 supporting hardware and operating on a specific ethanol blend. It combines the proven foundation of an off-the-shelf calibration with vehicle-specific data-log review and \u003cstrong\u003eup to four calibration revisions\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eRather than receiving the same generic Stage 2 file used on every vehicle, your calibration is matched to your ECU software, factory turbocharger, transmission, modifications, base fuel, and approved ethanol concentration.\u003c\/p\u003e\n\u003cp\u003eThe result is stronger acceleration, improved turbo response, optimized ignition performance, and more consistent power delivery tailored to the way your vehicle is actually configured.\u003c\/p\u003e\n\u003ch2\u003eDesigned for Stage 2 Ethanol-Blend Applications\u003c\/h2\u003e\n\u003cp\u003eThis service is intended for vehicles retaining a factory \u003cstrong\u003eIS12, IS20, or IS38 turbocharger\u003c\/strong\u003e and equipped with the appropriate Stage 2 supporting hardware.\u003c\/p\u003e\n\u003cp\u003eUsing an approved ethanol blend can provide increased effective octane and improved knock resistance compared with standard pump gasoline. When supported by the vehicle’s fuel system, this allows the calibration to make more effective use of the available turbocharger and airflow.\u003c\/p\u003e\n\u003cp\u003eDepending on the vehicle and configuration, calibration refinement may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eBoost and engine-load targeting\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFactory electronic wastegate control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIgnition timing optimization\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLambda and fueling strategy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-pressure and low-pressure fuel control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTorque delivery and management\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThrottle-response optimization\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurbo spool and transient response\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBoost-by-gear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKnock-control evaluation\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIntake and exhaust camshaft strategy\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTemperature and component protection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eECU and transmission torque coordination\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-RPM airflow and power delivery\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe objective is not simply to command more boost. It is to create a complete Stage 2 calibration that uses the increased airflow and available fuel quality effectively.\u003c\/p\u003e\n\u003ch2\u003eSemi-Custom Calibration with Up to Four Revisions\u003c\/h2\u003e\n\u003cp\u003eYour tune begins with a proven Stage 2 ethanol-blend base calibration matched to your vehicle and ECU software.\u003c\/p\u003e\n\u003cp\u003eAfter the initial calibration is installed, requested data logs are reviewed to evaluate how your vehicle is responding. When necessary, revisions are made to refine boost control, ignition behavior, fueling, torque delivery, and overall drivability.\u003c\/p\u003e\n\u003cp\u003eThis service includes \u003cstrong\u003eup to four data-driven calibration revisions\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eAreas reviewed may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRequested versus actual boost\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWastegate position and control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEngine load and airflow\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIgnition timing and correction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLambda and fuel trims\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-pressure fuel performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-pressure fuel performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eThrottle closure\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTorque intervention\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIntake-air temperature\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eEthanol-blend fueling demand\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eKnock activity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurbo response\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOverall power delivery\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot every vehicle will require all four revisions. Once the calibration is operating properly and meeting the agreed Stage 2 goals, the tuning process is considered complete.\u003c\/p\u003e\n\u003cp\u003eIncluded revisions apply only to the vehicle, hardware, transmission, fuel grade, and ethanol concentration originally submitted with the order.\u003c\/p\u003e\n\u003ch2\u003eMore Than a Generic Stage 2 Tune\u003c\/h2\u003e\n\u003cp\u003eTraditional off-the-shelf calibrations are designed to operate across a wide range of vehicles, climates, fuel quality, and hardware combinations.\u003c\/p\u003e\n\u003cp\u003eOur semi-custom process adds an important level of refinement by reviewing real operating data from your specific vehicle.\u003c\/p\u003e\n\u003cp\u003eThis allows the calibration to be evaluated around:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eYour exact ECU software\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour factory turbocharger\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour installed Stage 2 hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour transmission\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour available base fuel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour approved ethanol concentration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour vehicle’s actual boost and wastegate behavior\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour fuel-system capability\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eYour ignition and knock-control response\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou receive the convenience of a proven calibration foundation with the added confidence of vehicle-specific data review and refinement.\u003c\/p\u003e\n\u003ch2\u003eSupported Factory Turbo Applications\u003c\/h2\u003e\n\u003cp\u003eThis service is intended for supported EA888.3 Volkswagen and Audi vehicles retaining one of the following factory turbochargers:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIS12\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIS20\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eIS38\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHybrid, SRX, and full-frame turbocharger applications require the appropriate upgraded-turbo custom calibration service.\u003c\/p\u003e\n\u003ch2\u003eTypical Stage 2 Hardware\u003c\/h2\u003e\n\u003cp\u003eA compatible Stage 2 configuration may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eFactory IS12, IS20, or IS38 turbocharger\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCompatible high-flow downpipe\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStock or upgraded intake system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUpgraded turbo inlet\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUpgraded intercooler\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUpgraded charge piping\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStock or upgraded cat-back exhaust\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDSG or manual transmission\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFactory or approved upgraded fueling components\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eProperly functioning factory electronic wastegate system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn upgraded intercooler is strongly recommended, particularly in warmer climates or during repeated high-load operation.\u003c\/p\u003e\n\u003cp\u003eExact hardware requirements may vary by vehicle, turbocharger, fuel system, and intended ethanol concentration.\u003c\/p\u003e\n\u003ch2\u003eFixed Ethanol-Blend Calibration\u003c\/h2\u003e\n\u003cp\u003eThis calibration is designed for a \u003cstrong\u003especific, approved ethanol concentration\u003c\/strong\u003e or a narrow approved blend range.\u003c\/p\u003e\n\u003cp\u003eCommon examples may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eE20\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eE30\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eE40\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe appropriate blend will be determined after reviewing the vehicle, turbocharger, fuel system, base fuel, and performance goals.\u003c\/p\u003e\n\u003cp\u003eThis product is \u003cstrong\u003enot a true flex-fuel calibration\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe vehicle must be operated using the approved ethanol blend whenever this calibration is installed or selected. Do not operate the vehicle on straight pump gasoline, full E85, or a substantially different ethanol concentration unless a separate compatible calibration is installed.\u003c\/p\u003e\n\u003cp\u003eTrue flex-fuel operation requires the appropriate ethanol-content sensor, ECU integration, and dedicated flex-fuel calibration service.\u003c\/p\u003e\n\u003ch2\u003eEthanol Testing and Mixing Requirements\u003c\/h2\u003e\n\u003cp\u003eFuel sold as E85 does not always contain the same percentage of ethanol. Actual ethanol content can vary by season, location, and fuel supplier.\u003c\/p\u003e\n\u003cp\u003eThe customer is responsible for accurately testing and preparing the approved fuel blend.\u003c\/p\u003e\n\u003cp\u003eYou will need:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eA reliable ethanol-content testing method\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA known quantity of base gasoline\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA known quantity of ethanol fuel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAccurate blend calculations\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConsistent access to the fuel used during tuning\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA fully mixed tank before collecting data logs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAn ethanol-content test kit or compatible electronic ethanol-content measuring device is strongly recommended.\u003c\/p\u003e\n\u003cp\u003eData logs should not be collected until the blend is fully mixed and the vehicle has been driven long enough for the new fuel concentration to reach the engine.\u003c\/p\u003e\n\u003cp\u003eIncorrectly measured or inconsistent fuel can result in inaccurate data, poor performance, fuel-pressure limitations, excessive correction, or unsafe operating conditions.\u003c\/p\u003e\n\u003ch2\u003eFully Integrated ECU-Controlled Boost\u003c\/h2\u003e\n\u003cp\u003eBoost remains fully managed through the factory ECU and electronic wastegate system.\u003c\/p\u003e\n\u003cp\u003eThis allows boost control to operate as part of the complete engine-management strategy, coordinating with engine load, torque control, ignition timing, fueling, throttle position, gear selection, fuel pressure, and temperature protection.\u003c\/p\u003e\n\u003cp\u003eDepending on the application, refinement may include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eRPM-based boost targeting\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWastegate pre-control\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eClosed-loop boost correction\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eImproved spool and transient response\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eRefined part-throttle boost behavior\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTorque-based boost management\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBoost-by-gear\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTemperature-based protection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFuel-pressure-based protection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eOverboost protection\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eControlled torque delivery in lower gears\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe goal is controlled, repeatable performance—not simply the highest possible boost number.\u003c\/p\u003e\n\u003ch2\u003ePerformance You Can Feel\u003c\/h2\u003e\n\u003cp\u003eDepending on the vehicle, turbocharger, ethanol concentration, base-fuel quality, transmission, and supporting hardware, the calibration may provide:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eIncreased horsepower and torque\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eStronger midrange acceleration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eImproved top-end performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSharper throttle response\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFaster turbo response\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMore consistent ignition performance\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eImproved knock resistance compared with lower-octane fuel\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMore consistent boost delivery\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSmoother and more predictable power\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eImproved ECU and transmission coordination\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBetter use of the installed Stage 2 hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFinal performance will vary based on mechanical condition, fuel quality, actual ethanol content, environmental conditions, transmission, and supporting modifications.\u003c\/p\u003e\n\u003cp\u003eNo specific horsepower or torque output is guaranteed.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cp\u003eYour Stage 2 ethanol-blend semi-custom tuning service includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eProven Stage 2 ethanol-blend base calibration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration matched to your ECU software\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eVehicle and hardware compatibility review\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCalibration matched to the approved ethanol concentration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInitial data-log review\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUp to four calibration revisions\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBoost, ignition, fueling, and torque refinement\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFactory ECU-controlled boost management\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTechnical support throughout the revision process\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFinal calibration review\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMulti-map switching, rolling anti-lag, true flex fuel, and other specialized features are not included unless specifically stated or purchased separately.\u003c\/p\u003e\n\u003ch2\u003eHow the Tuning Process Works\u003c\/h2\u003e\n\u003ch3\u003e1. Submit Your Vehicle Information\u003c\/h3\u003e\n\u003cp\u003eProvide the vehicle year, make, model, ECU information, transmission, complete modification list, factory turbocharger, fuel-system configuration, available base fuel, and performance goals.\u003c\/p\u003e\n\u003ch3\u003e2. Hardware and Fuel Review\u003c\/h3\u003e\n\u003cp\u003eYour setup will be reviewed to confirm that it is appropriate for the Stage 2 ethanol-blend semi-custom service.\u003c\/p\u003e\n\u003ch3\u003e3. Determine the Approved Blend\u003c\/h3\u003e\n\u003cp\u003eAn appropriate ethanol concentration will be selected based on the vehicle, fuel system, turbocharger, base fuel, and intended performance level.\u003c\/p\u003e\n\u003ch3\u003e4. Prepare the Fuel\u003c\/h3\u003e\n\u003cp\u003eTest the ethanol fuel, calculate the required mixture, and prepare the approved blend before installing the calibration.\u003c\/p\u003e\n\u003ch3\u003e5. Receive the Initial Calibration\u003c\/h3\u003e\n\u003cp\u003eA proven Stage 2 ethanol-blend base file will be selected and configured for your vehicle and ECU software.\u003c\/p\u003e\n\u003ch3\u003e6. Flash and Data Log\u003c\/h3\u003e\n\u003cp\u003eInstall the calibration and collect the requested data logs using a supported wireless interface and Android logging application.\u003c\/p\u003e\n\u003ch3\u003e7. Log Review and Revisions\u003c\/h3\u003e\n\u003cp\u003eSubmitted logs will be reviewed for boost control, ignition behavior, fueling, fuel pressure, torque intervention, throttle operation, and other critical parameters.\u003c\/p\u003e\n\u003cp\u003eRevised files will be supplied when necessary. The service includes up to four revisions.\u003c\/p\u003e\n\u003ch3\u003e8. Final Calibration Review\u003c\/h3\u003e\n\u003cp\u003eOnce the vehicle is operating correctly and meeting the agreed Stage 2 ethanol-blend goals, the tuning process will be considered complete.\u003c\/p\u003e\n\u003ch2\u003eWhat You’ll Need\u003c\/h2\u003e\n\u003cp\u003eRemote tuning and data logging require:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eA compatible \u003cstrong\u003ewireless vehicle interface\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA supported \u003cstrong\u003edata-logging or log-viewer application\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eAn \u003cstrong\u003eAndroid phone or tablet\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA reliable ethanol-content testing method\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eConsistent access to the selected gasoline and ethanol fuels\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eA safe and appropriate location for collecting requested logs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA dedicated budget Android phone or tablet may be used and connected through a mobile hotspot when necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApple and iOS devices are not currently supported.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eVehicle Condition Requirements\u003c\/h2\u003e\n\u003cp\u003eThe vehicle must be mechanically sound before tuning begins.\u003c\/p\u003e\n\u003cp\u003eCalibration revisions are intended to refine a properly functioning vehicle. They are not a substitute for mechanical diagnosis or repair.\u003c\/p\u003e\n\u003cp\u003eThe vehicle should be free from unresolved issues such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eBoost or vacuum leaks\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExhaust leaks ahead of critical sensors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eFaulty ignition coils\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWorn or incorrectly gapped spark plugs\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-pressure or low-pressure fuel problems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eWastegate or turbocharger faults\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eExcessive knock activity\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eCooling-system problems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTiming or camshaft faults\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTransmission or clutch problems\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eActive engine-management faults\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIncompatible or improperly installed hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAny mechanical or fuel-system problem discovered during data-log review must be corrected before the calibration process can continue.\u003c\/p\u003e\n\u003ch2\u003eChanges to Fuel or Hardware\u003c\/h2\u003e\n\u003cp\u003eThe included revisions apply only to the original submitted configuration.\u003c\/p\u003e\n\u003cp\u003eChanging any of the following may require a new or upgraded calibration service:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eEthanol concentration\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eBase gasoline octane\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eDownpipe\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTurbocharger\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eHigh-pressure fuel pump\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eLow-pressure fuel pump\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePort-injection system\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eInjectors\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eIntake manifold\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eTransmission\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eMajor airflow hardware\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll planned modifications should be completed before the tuning process begins.\u003c\/p\u003e\n\u003ch2\u003eGLS Performance Motorsports\u003c\/h2\u003e\n\u003cp\u003eGet the proven foundation of a Stage 2 calibration with the added octane, performance potential, and vehicle-specific refinement of an approved ethanol blend.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore airflow. More octane. More performance.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt for your build. Tuned to perform.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis service is intended for supported factory-turbo Stage 2 vehicles operating on a specific approved ethanol blend. It is not a true flex-fuel calibration.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor off-road and track use only.\u003c\/strong\u003e\u003c\/p\u003e","brand":"GLS Performance Motorsports LLC","offers":[{"title":"Default Title","offer_id":45966213775443,"sku":null,"price":475.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/8419\/3619\/files\/ChatGPTImageAug14_2026_04_14_12PM.png?v=1786749265","url":"https:\/\/www.glsperformance.com\/products\/ea888-3-stage-2-ethanol-blend-semi-custom-ots-ecu-tune","provider":"GLS Performance Motorsports LLC","version":"1.0","type":"link"}