{"product_id":"2-0-tfsi-ea113-hpfp-catcams-roller-kit-with-cam-lobe","title":"2.0 TFSI EA113 HPFP Anodized CatCams Roller Kit with Cam Lobe","description":"\u003cp data-end=\"80\" data-start=\"63\"\u003e\u003cstrong data-end=\"80\" data-start=\"63\"\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"734\" data-start=\"82\"\u003e\n\u003cli data-end=\"138\" data-start=\"82\"\u003e\n\u003cp data-end=\"138\" data-start=\"84\"\u003e\u003cstrong\u003ePrecision-engineered roller system for EA113 engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"200\" data-start=\"139\"\u003e\n\u003cp data-end=\"200\" data-start=\"141\"\u003e\u003cstrong\u003eDesigned for high-RPM and extreme horsepower applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"252\" data-start=\"201\"\u003e\n\u003cp data-end=\"252\" data-start=\"203\"\u003e\u003cstrong\u003eReduced friction compared to factory components\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"312\" data-start=\"253\"\u003e\n\u003cp data-end=\"312\" data-start=\"255\"\u003e\u003cstrong\u003eImproved valvetrain stability under high boost pressure\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"352\" data-start=\"313\"\u003e\n\u003cp data-end=\"352\" data-start=\"315\"\u003e\u003cstrong\u003eOptimized cam lobe contact geometry\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"414\" data-start=\"353\"\u003e\n\u003cp data-end=\"414\" data-start=\"355\"\u003e\u003cstrong\u003eManufactured from high-strength, wear-resistant materials\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"468\" data-start=\"415\"\u003e\n\u003cp data-end=\"468\" data-start=\"417\"\u003e\u003cstrong\u003eCNC-machined for maximum accuracy and consistency\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"529\" data-start=\"469\"\u003e\n\u003cp data-end=\"529\" data-start=\"471\"\u003e\u003cstrong\u003eDirect-fit solution for performance-built cylinder heads\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"593\" data-start=\"530\"\u003e\n\u003cp data-end=\"593\" data-start=\"532\"\u003e\u003cstrong\u003eSuitable for drag racing and high-performance street builds\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"666\" data-start=\"594\"\u003e\n\u003cp data-end=\"666\" data-start=\"596\"\u003e\u003cstrong\u003eSupports increased fuel flow capacity for high-demand fueling setups\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\" data-end=\"734\" data-start=\"667\"\u003e\n\u003cp data-end=\"734\" data-start=\"669\"\u003e\u003cstrong\u003eDeveloped and tested by RTMG Performance for extreme durability\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis Kit includes all parts needed for converting the cam follower type High-Pressure Fuel Pump to a roller follower kit just like the newer EA888 TSI engines. It is common for the 2.0 TFSI EA113 engine to have excessive wear in the cam follower which touches the camshaft lobe. \u003c\/p\u003e\n\u003cp\u003eIf the cam follower wears all the way through, excessive damage can be caused to the engine and intake camshaft. This conversion protects against this problem, and ensures the reliability and smooth operation of your high-pressure fuel pump, without the need of replacing the cam follower again.\u003c\/p\u003e\n\u003cp\u003eIn addition, the fuel pump flow capability is improved by increasing the effective stroke by 28% (or 18.5% in CDL engines).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e The installation of this kit requires machining of the high-pressure fuel pump cover at 33.1mm to fit the roller kit conversion. In addition, removal of the cam lobe that drives the pump and pressing the new lobe in the same orientation is required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL INFORMATION\u003c\/strong\u003e\u003cbr\u003eThe first VW engine with direct injection was designed for low power usage; however, its development was not improved. At higher power levels, increasing fuel pressure is necessary to overcome the pressure inside the combustion chamber for a homogeneous fuel dispersion.\u003c\/p\u003e\n\u003cp\u003eA major drawback of the EA113 2.0L TFSI engine's fuel system is that as fuel pressure increases through ECU tuning (remapping), the high-pressure mechanical pump, which operates with the camshaft, relies on sliding friction. This means the tappet rubs against the cam lobe, and with the increase in fuel pressure, this surface endures additional load. Consequently, the oil film breaks down, causing direct contact between the factory tappet and the cam lobe, which leads to excessive wear due to increased friction and heat. This results in metal debris filling the engine, often damaging the oil pump and causing complete engine failure.\u003c\/p\u003e\n\u003cp\u003eThe key to our improved kit lies in rolling friction. The piston that reciprocates on the cam lobe, with the installation of a cylindrical bearing, rolls smoothly, significantly reducing friction and heat. This also provides a slight increase in power due to reduced friction, but more importantly, it ensures long-term durability of the assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTECHNICAL SPECIFICATIONS\u003c\/strong\u003e\u003cbr\u003eThe body is made from forged aluminum 6026 T-6 EUROPAL in a single machining phase on our 5-axis CNC lathe, ensuring perpendicularity and optimal fit between the cylinder and piston, while also reducing surface roughness.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA key advantage of our product is the anodized coating\u003c\/strong\u003e, which hardens the aluminum surface while significantly reducing the friction coefficient between the piston and the body at high engine speeds, minimizing piston bounce. Additionally, the anodized coating protects the body from oxidation over the long term, providing shine, aesthetics, and color within the engine bay.\u003c\/p\u003e\n\u003cp\u003eThe cam lobe is made of high-strength steel and undergoes heat treatment for maximum hardness and durability. Our lobe is not the same as the factory one; it has a longer stroke to increase the fuel pump’s flow.\u003c\/p\u003e\n\u003cp\u003eThere are two critical factors in increasing the pump’s flow: the diameter of the piston and the stroke. We have designed the lobe to achieve up to 28% more flow with the same piston, which is crucial for larger turbochargers such as the K04064 and some hybrid turbos, all thanks to the increased stroke.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFactory stroke: 4.5mm – RTMG Performance lobe stroke: 5.7mm.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis text is written by RTMG Performance and retains its intellectual property rights.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eThis product is designed only for CatCams camshafts.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFor the installation of the roller kit, the base will need to be opened to 33 millimeters.\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDuring the removal of the factory cam lobe, it must be marked at maximum lift at one of the three maximum-lift positions, so that the new upgraded lobe can be installed in exactly the same position.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RTMG Performance","offers":[{"title":"Purple","offer_id":46000912171091,"sku":"901-0323","price":336.55,"currency_code":"USD","in_stock":true},{"title":"Red","offer_id":46000912203859,"sku":"901-0321","price":336.55,"currency_code":"USD","in_stock":true},{"title":"Blue","offer_id":46000912236627,"sku":"901-0322","price":336.55,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":46000912269395,"sku":"901-0320","price":336.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0559\/8419\/3619\/files\/20-tfsi-ea113-hpfp-catcams-roller-kit-with-cam-lobe-556217.jpg?v=1787157670","url":"https:\/\/www.glsperformance.com\/products\/2-0-tfsi-ea113-hpfp-catcams-roller-kit-with-cam-lobe","provider":"GLS Performance Motorsports LLC","version":"1.0","type":"link"}